1 / 2
Nozzle Wiper for Voron Trident
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wipe your nozzle on a piece of PTFE tubing.
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 210
- Makes
- 0
- Views
- 1,603
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
Wipe your nozzle on a piece of PTFE tubing
You will need (BOM):
- 1x M2x15 screw
- 3x M3x12 screw
- 2x profile T Nut
- 1x M3 heat insert
Here is my macro that works for me. You will need to fine tune this for your own printer. I go down to Z=-0.3. Because people might not read what they copy and paste, I modified it to Z=1.3 below, to hopefully save your build plate.
[gcode_macro NOZZLE_CLEAN]
gcode:
G1 F18000 ; set reasonable fast feedrate
G1 X212 Y300 Z10 ; go to hover above start position
G1 Z1.3; -0.3 ; lower nozzle [[ADJUST DOWN IF THE REST IS RIGHT]]
; do the wiggling
G1 X192
G1 X212
G1 X192
G1 X212
G1 X192
; raise nozzle
G1 Z10The same Idea is discussed here, but its for a 2.4.