bouldering-/ volleyball- fingertape box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple box for keeping the fingertape clean. With volleyball / climbing logo or without logo. Tight fit thread.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 139
- Makes
- 0
- Views
- 390
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Public Domain
tl:dr - Prints in high resolution, the thread has little play.
- The thread has to be turned a few times before it runs smoothly.
- Support structures only at the bottom of the printing plate. If you print the version without the logo, you don't need any supports.
-------------------------------------------
Maybe you know it - the fingertape is dirty because you only ever put it in your moderately clean rucksack when climbing. Well, 3d printing to the rescue. Printed in PLA.
Three variants: With a bouldering logo (credits for the SVG Andrian Dwi Saputro on vecteezy.com), the volleyball logo and without logo.
The base has a diameter of 50mm and a height of 44mm - but change it to your liking. I am also uploading the Fusion360 file.
If you don't have access to Fusion, leave me a comment with the dimensions and I'll change it for you.
Translated with DeepL.com (free version)