Hueforge - Christmas Bauble Tree Ornament 8 cm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hueforge - Decoro per albero di Natale
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 114
- Makes
- 2
- Views
- 395
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 80x85.39mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA Black Transmission Distance: 0.6
PLA Silver Transmission Distance: 3.2
PLA White Transmission Distance: 5
PLA Red Transmission Distance: 4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Silver
At layer #8 (0.72mm) swap to Jade White
At layer #15 (1.28mm) swap to Red
At layer #22 (1.84mm) swap to Jade White for the rest.