Lazy Susan Top - Tall
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extension top for @logicalplanet 's Lazy Susan Mechanism 2.0 (Conical Bearings)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
This is a top for @logicalplanet ‘s model ( https://www.printables.com/model/777889-lazy-susan-mechanism-20-conical-bearings ) that I created for elevating objects for 3d scanning.
The bottom of each of the three legs has space for a 3mmx5mmx4mm heat set threaded insert. You'll also need 3 x 3mm screws (I used hex socket cap).
The legs are about 6inches (152.4mm) tall. They should be strong enough to support light objects if you print them with 4 walls, 3 top layers, 3 bottom layers, and 15% gyroid infill.
I happened to print mine out of Bambu Lab PETG-HF in black, with a 0.4mm nozzle and 0.2mm layer height.
Note that this is only the part in the pictures that is black in color. Nothing else is included here. :)