1 / 1
Wireless Charging Shelf - Desktop Edition (v0.9 Beta)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Your (almost) perfect Magsafe desk companion!
- Rating
- 4 / 5
- Likes
- 12
- Downloads
- 53
- Makes
- 1
- Views
- 460
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a rough remix of Popandsicle's Wireless Charging Shelf, so check out his model!
Key points I wanted to improve on with the original idea:
- I wanted it to be a desktop accessory
- Added 4 recesses for some rubber feet
- Removed the shelf mount and made it flat
- The opening for the USB-C end fits perfectly, and although the bigger channel saved on some filament, it made it harder to hit the sweet spot for feeding through the cable.
- Shrunk down the cable channel
- Widened and remade the opening for easier feeding through
Which version do I need to print?:
Your print bed size is below 27.5cm:
- print the upright version
- It features a flat backside (similar to the original model)
- print it with on a 45° angle (From XY=0 to XY=225)
Your print bed size is above 27.5cm:
- Pretty rare but leads to a better result
- Backside has the same look as the others
- The model is 274.9mm long so double check!
Print Settings:
| Layer height: | 0.2-0.3mm |
|---|---|
| Infill: | 5-9% gyroid |
| Material: | Any, PLA for optimal quality |
| Supports: | Not needed/optional |
Changelog:
v0.9 (17.11.24):
- Added some pretty text
- Beta Release!
v0.85 (17.11.24):
- Testing of the model
v0.5 (14.11.24):
- Found Popansickle's model and fell in love with it
- Remodeled and designed out a rough scetch for a desktop version
- Test printing it