1 / 2
CR2032 single cell holder with integrated cradle switch box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A single print to hold a CR2032 cell and switch to power simple circuits.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 37
- Makes
- 0
- Views
- 240
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Inspired by the simplest CR2032 battery holders, this one has a switch box stuck on. The switch I use is 9 mm wide and 14 mm high.
Soldering is required for reliable assembly. I solder wires to the switch, and also solder the actual circuit (like the LED strip in the photo). Battery contacts are freely inserted: the battery holds them in place easily. Electrician's tape can be used if additional insulation or protection is required.