Subaru Vent Gauge Pod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Suits 52mm gauge pods - right hand drive for Subaru Impreza WRX/STI (08-14).
- Rating
- 0 / 5
- Likes
- 65
- Downloads
- 800
- Makes
- 0
- Views
- 3,755
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
A single gauge pod that replaces the existing dash vent in any Subaru Impreza WRX/STI 08-14.
For left hand drive, you can mirror the model in your slicer.
Material: Ensure to print with a higher temperature resistance material. PLA likely will melt in sun.
Printing Time: 1hr37m
Filament Used: 33.19g
How to print: Orientate model as shown ↓
- Layer Height: 0.2
- Supports: Yes/Tree
- Infill: 20%
- Brim: Optional
- STL & .3mf provided (.3mf ready to print)
How to Install:
Step 1: Unclip and remove existing dash vent. Route gauge wiring under the dash and through the vent opening.
Step 2: From the rear of the model, feed the wiring through the square hole and up to the gauge pod enclosure.
Step 3: Plug in necessary wiring to your gauge.
Step 4: Press fit your gauge into the pod and insert the pod into the vent pressing firmly. Enjoy!
