1 / 7
BTT HDMI7 mounted vertically on 2020/3030 extrusion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified case and mount for vertical mounting on extrusion. Both 2020 and 3030 version available.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 74
- Makes
- 0
- Views
- 492
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed to place my BTT Hdmi7 on the side of my enclosure, so I made this remix of the very nice case made by @Artxime.
There is a version for both 2020 and 3030 extrusions.
I also added some holes for zip ties. Insert the zipties before you slide in the screen!
Inside the case I used m3 nylon nuts to attach the hinge.
Assembly order.
- Attach the hinge to the frame with m4 10mm bolts.
- Put the buttons, m3 nylon nuts and zipties in place and slide in the display and attach with 10mm m3 bolts.
- Attach the case to the hinge with a 16mm m3 on the top and a 20mm m3 on the bottom.
- Enjoy :)
I printed in PLA since it is outside the enclosure, but any filament can be used. For the best result print with organic support that you draw on - see images.