1 / 5
Housing for Solder Station HotPens
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This are the files for a housing i made for the Solder Station named HotPens from German Make (6/2021)
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 38
- Makes
- 0
- Views
- 278
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is the housing i made for the solder station HotPens from the german Make 6/2021.
There are two versions, one for hanging, one for standing.
Things needed to complete the hanging version
3d printed:
- 1x Housing_hanging
- 1x Front_hanging
- 1x Mounting Bracket
- 1x Knob
- 1x Mounting2_hanging
- 1x Mounting3_hanging
other:
- 12x M4 Heat-Set Inserts
- 12x M4x10mm Screw
- 8x M3x15mm Screw (for the tubes left and right)
- 3x M3x8mm Screw (for the power supply)
- D20mm Aluminium tube
Things needed to complete the standing version
3d printed:
- 1x Housing
- 1x Front Plate
- 1x Knob
- 1x Mounting2
- 1x Mounting3
- 1x Strain relief
other:
- 8x M4 Heat-Set Inserts
- 8x M4x10mm Screw
- 8x M3x15mm Screw (for the tubes left and right)
- 3x M3x8mm Screw (for the power supply)
- 2x M3x12 Screw for the strain relief
- D20mm Aluminium tube