1 / 1

SMILE

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

Source: Printables
Category: 2D Plates & Logos
License: Creative Commons — Attribution — Noncommercial — Share Alike

Details Makes & comments Remixes Collections

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x103.57mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PETG JAYO White Transmission Distance: 6
This print uses 4 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #18 (1.52mm) swap to Ash Gray
At layer #21 (1.76mm) swap to White for the rest.