1 / 1
PS4 Wall Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
Simple design that only needs you to screw it to the wall.
3 holes in line. I advise screwing the top (Straight) and bottom(angle) screws directly into the stud in your wall. You also have the option to use two screws straight if you do not have the space to access the bottom hole.
I included a cover logo for the holes I provided that will enable you to use a long screwdriver or drill bit.
Recommended Settings:
- Printer brand: Anycubic
- Printer: Kobra 2 Max
- Brim: Yes (5mm outside only)
- Supports: Yes (tree auto)
- Resolution: 0.2
- Infill: 50%
- Filament brand: Anycubic Basic
- Filament color: White / Black (logo)
- Filament material: PLA
- Notes: I used 3” deck screws directly into a wall stud.
If you make this design, post a make I would love to see someone print my design!