1 / 1
Simle ruler/scale in inches and cm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
6 inch, 15 cm ruler you can print!
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 356
- Makes
- 0
- Views
- 1,024
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a fun model created in Fusion 360 - see if your printer is accurate enough to print a ruler!
Printing Instructions
- Make sure to enable ‘Detect thin walls’ in the print settings.
- Add layer changes to print the ticks and numbers in different colors. Don't use the automatic ‘Logo’ color change option in PrusaSlicer 2.4+ - this has multiple color layers.
- Pick contrasting colors, first color is the tick marks, second is the main ruler, third is for the numbers (can be same as first color)
Attached 3MF files has these settings.
Can print in PLA or PETG, I printed one in Flex too.
If you print this, please post a make. Feedback and suggestions are appreciated!