Worksharp Pro Dual-Use Whetstone Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Optimized adapter for Work Sharp sharpener allows cutting whetstones, ensuring better motion and secure magnetic fit.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 26
- Makes
- 0
- Views
- 598
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Like Staafi, I faced challenges with the costs of diamond whetstones, but I also noticed limited motion when using 150 mm whetstones.
To address this, I optimized the adapter for the Work Sharp Benchtop knife sharpener.
You can cut the whetstones in half and glue one half to the mounting part, allowing you to keep the other half for secondary use. This modification ensures sufficient motion for effective knife sharpening.
The magnetic baseplate is secured with two small screws and washers (or larger heads). To ensure the mounting part stays in place, you can add two D4x3 mm magnets in the holder and two D4x3 mm magnets in the mounting part. When mounted, the parts will snap securely together. Additionally, the hole for the rod has been improved for better motion.