1 / 4
Classical Bird Feed House
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Classical Bird Feed HouseRequired Printed Parts:Back.stl (1x)Floor.stl (1x)Front.stl (1x)MainPillar.stl…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 26
- Makes
- 0
- Views
- 152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Classical Bird Feed House
Required Printed Parts:
- Back.stl (1x)
- Floor.stl (1x)
- Front.stl (1x)
- MainPillar.stl (1x)
- RoofLeft.stl (1x)
- RoofRight.stl (1x)
- Side.stl (2x)
- SidePillarLeft.stl (1x)
- SidePillarRight.stl (1x)
Optional Printed Parts:
- AlignmentPinASymmetrical.stl (4x)
- AlignmentPinSymmetrical.stl (3x)
- Bumper (2x) (Ninjaflex 20% infill)
Required non-printed parts:
- cone head screw M3*10 (12x)
- hex head screw M3*20 (6x)
- brass insert nut M3 L4 OD5 (18x)
Recommended Materials: ABS or PETG (10% infill)
Remark:
- I used metal alignment pins and super glue to attach the roof to the pillars
Category: Other