1 / 2
Open Ball - Clearanced Vise Adaptor Plate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I was having issues with the countersunk screws on the plate so I modified it slightly to give better clearance.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 41
- Makes
- 0
- Views
- 327
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I noticed that it was difficult to remove the screws if I wanted to pull the bearing out, so I made a modified version of the vise adaptor plate with some small cutouts to clear the screw heads. I also had to modify the bearings to allow me to swap over the index plates (I did this on my drill press with an end mill) which allows me to swap over the entire assembly faster by removing the 4x M8 screws.