1 / 3
BeamCase 120x15 Slim Fan Minimal One-Side Mount — image 1
1 / 3

BeamCase 120x15 Slim Fan Minimal One-Side Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Cut down version of the BeamCase "one-side" fan mount for use w/ 120x15mm slim fan on side panels

Rating
0 / 5
Likes
6
Downloads
23
Makes
0
Views
220
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a severely cut down version of the BeamCase "one-side" fan mount for use w/ 120x15mm slim fan on side panels.

Many of the compromises made for this bracket are to accommodate mounting “inside” the mounting points of a 140mm fan using the “slot-in” bracket, when mounting the 120mm slim fan perpendicular to the 140mm fan.

The bracket cannot be removed without removing the fan, so attachment to the bracket is complicated. There are two versions of the model:

  1. A version where the conventional fan corner screw hole has been replaced by a threaded M4 hole. Use a countersunk M4 screw with a total screw length (including head) of 20-24mm to attach the fan
  2. A version with the original fan corner screw hole diameter, in case you have other size fasteners you'd like to use.

The model is incredibly thin, but I printed it out of PETG-CF and it seems to support the fans well enough to prevent the case panels from pushing them into the rest of the enclosure.

Tags