BeamCase eATX Mobo Beam
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement third mobo beam for eATX mobos in BeamCase ATX
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 30
- Makes
- 0
- Views
- 930
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement for “beam 3” of the motherboard support beams for the BeamCase ATX case (https://www.printables.com/model/897748-beamcase-atx-and-microatx-compact-modular-matx-cas). The original model included a lip on the right side of the beam that prevented using any wider mobos than eATX, this model removes that lip to allow wider mobos to fit.
Note that using many eATX boards will require mounting the PSU bracket on the non-motheboard side of the case and/or repositioning the PSU from the demo builds on the BeamCase page!
Not all eATX motherboards are the same width, so ensure fitment and compatibility before printing/assuming this will fit. I've tested with an Asrock x870e taichi lite (12"x10.5", 305x267mm) which seems to be a relatively common size for eATX boards. They can be up to 305x330mm, which probably wouldn't fit? YMMV with bigger boards!