1 / 2
Bringus Studios Tecno Pocket Go 10.5" Monitor Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bringus Studios Tecno Pocket Go 10.5" Monitor Mount
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 41
- Makes
- 0
- Views
- 1,497
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
This is pretty crummily designed but it does work. It's a very snug fit. The bottom plate is intentionally thin to allow it to flex to grip the controller tighter.
You will need:
- Monitor - https://www.amazon.com/gp/product/B0C7KPPXTZ
- M3 brass heat inserts - https://www.amazon.com/gp/product/B0CZXMT5PB
- Various M3 screws - https://www.amazon.com/gp/product/B07VNDFYNQ
Unfortunately, the monitor can't receive video from the Pocket Go over a single USB-C cable. Because of this you'll need either:
If you are ok with using both USB-C ports on the device:
- 1x USB-C cable
- 1x USB-C to HDMI adapter
- 1x HDMI cable
- 1x HDMI to mini-HDMI adapter
If you want one free USB-C port on the device:
- 1x USB-C cable
- 1x USB-C dock with HDMI out and a USB-C port
- 1x HDMI cable
- 1x HDMI to mini-HDMI adapter
My recommendations for a dock and cables that are pretty short in length:
- Dock - https://www.amazon.com/gp/product/B0BR3M8XHK
- USB-C cable - https://www.amazon.com/dp/B0CFZNZN25
- HDMI cable - https://www.amazon.com/dp/B0C2PFNXDV
- HDMI to mini-HDMI adapter - https://www.amazon.com/dp/B07VXPW3BZ
A couple of right-angle USB-C adapters help hide the cabling too:
- 90 degree USB-C adapters - https://www.amazon.com/dp/B0B2NJ3P3L
