1 / 3
SteppIR Sweep bushing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a reverse engineered bushing for a SteppIR antenna. SteppIR calls it a Sweep Diverter.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is a reverse engineered bushing for a SteppIR antenna. SteppIR calls it a Sweep Diverter. Because the thickness of the paint over the fiberglass rods can be inconsistent the printer is encouraged to print one and dry fit it. I had to print mine at 100.5% in X and Y and 100% in Z for a snug but not too tight fit. As always YMMV. I printed mine in PETG with 40% gyroid infill, 0.4mm nozzle, 0.2mm layer height.