1 / 2
Basic Wine Cork
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Double Taper, 16.5mm and 18mm on the ends, 22mm in the middle. Meant for flex printing in TPU.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 95
- Makes
- 1
- Views
- 462
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed in TPU 95A, 0.20mm layers, 3 walls, 10% gyroid. The only thing I would change is dry the TPU more and NOT use the random scarfed seams :) (at least with this specific spool of TPU).
Definitely not meant to be used as a real wine cork. So the 45mm length is overkill, but it matches a real cork so there's that …