Detachable Cat ears for Motorcyle Helmet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cat ears for motorcycle helmet (uwu) . Can be attached directly or with the mount to be easily removable.
- Rating
- 5 / 5
- Likes
- 67
- Downloads
- 494
- Makes
- 1
- Views
- 1,852
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Costume Accessories
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The ear itself is split into two parts - inner and outer ear.
The inner ear can be printed separately in a different color (recommended) and glued into the outer ear.
The fully assembled ears can either be glued directly onto the helmet or you can use the detachable version of the outer ear and only glue the mount onto the helmet so the ears can be detached if not needed.
We recommend every part to be printed on the side that will face the front when mounted to the helmet. Supports are not required.
For a full set print the following:
2x insert
2x ear_with_mount.3mf OR ear_without_mount.stl
2x mount.3mf ONLY IF DETACHABLE OUTER EAR IS USED
I recommend printing at 0.15mm layer height aswell as using PETG for everything but the insert.
Credits to Pelb (Original Author)