1 / 8

MMU (Multi-Material-Upgrade)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

Source: Printables
Category: Other Printer Parts & Upgrades
License: Creative Commons — Attribution — Noncommercial — Share Alike

Details Makes & comments Remixes Collections

Not recommended for beginners.

also available on Makerworld
https://makerworld.com/en/models/1636170-mmu-multi-material-upgrade-diy#profileId-1728491

The Pico MMU is an open-source project designed to enable multi-material 3D printing on FDM printers. You can find the other STEP files on the GitHub repository

------------------------------ UPDATE ---------------------------------

NEW UPDATE (09.01.2025)

changes to the step file pcb-cover

UPDATE (29.12.2024)

New Gear-cover

New Plate ALT-1

------------------------------ Important ---------------------------------

The Heatsink goes on the Motor driver !in the real picture its on the wrong chip!
The Pico MMU is connected via USB or CAN BUS to the Raspberry pi (Klipper)
You will need an (Printer) board that supports Klipper
Marlin Firmware is not supported
If you own a standard Ender (Marlin Firmware) 3, S1, S1 Pro, etc. , you need to flash the control board with Klipper and use a Raspberry Pi running a Klipper firmware with Mainsail or Fluidd.