Pot luck label holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.86 – €1.05 net (excluding VAT)
For file: pot-luck-label-holder_0.4n_0.2mm_PLA_MINIIS_43m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.95 excluding VAT (range midpoint).
- Weight reported by the author
- 17 g
- Print time reported by the author
- 42.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Prints flat. You can bend it with hot water.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This prints flat and can be bent by dipping in hot water. There is a line scored on both sides to indicate the bend location. I used PLA since it is for indoor use. The Openscad file is included if you want to modify the design.