DIY Clock Kit Case (YSZ-4 or ZM-804)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case for the DIY clock kit YSZ-4 or ZM-804.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 29
- Makes
- 1
- Views
- 180
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case for the DIY clock kit YSZ-4 or ZM-804. Two versions are
available: one when the display is soldered touching the PCB board and one
when the display is soldered above the PCB without cutting the leads of the
display. You'll need to print two Push button extensions. A few dabs of glue
is required to hold the back to the case.
Support material is not required. An infill of 20% is recommended.
This object's main web page is:
http://www.ctheroux.com/diy-clock-kit-case-ysz-4-or-zm-804/.
This object was designed using Solid Edge Community Edition.
You can request the source files on the page listed above.