Magnetic Storage Boxes for Imperial Assault tokens & cards

This is my storage solution for (almost) all the tokens and cards for the Star Wars Imperial Assault board game, enabling quicker game setup and easy access.

I've created these boxes using my parametric design, customizing the boxes with different heights and bowl configurations, as well as creating some card storage boxes with a slanted back for easier browsing. 

Depending on how many of the extensions you own, you may need fewer or more of these boxes - but due to the modular design, you can always start with a few and add more as needed.

If you want to change anything about the design, you can get the Fusion file from the main design page and play around with it.

Notes about the magnets

• I use round 6mm magnets (these ones) which might not exactly match the ones you have, and your printer's tolerances might differ from mine, so you should print a small test print first (see the note below about the “magnet-test-stick”) before committing to printing all the boxes.  In the worst case scenario, you might have to use the Fusion file provided on the original design page to customize the cutouts for the magnets (and possibly other things you might want to change).
• I have now included a small “magnet-test-print” model, as well as a taller “magnet-test-stick”: Use this to test if your magnets fits well - and as a bonus, you can then use the stick as a tool to more easily place your magnets, using the correct orientation: Mark one end of the stick as the “up” end, and use it as a reference for the future! 
• I recommend using a bit of superglue to fix the magnets in place.
• This should go without saying, but just in case: Triple-check your magnets' orientation before glueing them in!  (ask me how I know… O:-) )
• I recommend putting in magnets at the bottom even for boxes/trays you think might always stay at the bottom: That way you have the most flexibility and can swap the boxes around in any order you like.

Enjoy and share your makes or remixes!

Update (2025-01-10):

• added a “magnet-test-print” and a taller “magnet-test-stick” which you can use to test the fit of your magnets before printing the full boxes. As a bonus, you can then use the stick as a tool to more easily place the magnets, with the correct orientation.