1 / 6
Wall mount for MIJIA Temperature and Humidity Monitor 2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount for MIJIA Temperature and Humidity Monitor 2
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 49
- Makes
- 0
- Views
- 659
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Got one of these sensors for each room in the house and wanted a to mount them in a way that accomplices the following goals:
- No permanent "damage" to the mounting spot
- Easy access to change the battery
- Mount as close as possible with the wall
The sensor fits snugly, but is not held in very strongly, to make sure that it can be taken down without loosening the adhesive tape.
The slot in the back is made for tape with a width of 29mm
The magnet used has a thickness of 1.75mm and diameter of 5mm
The magnet is held in place with a small dab of glue.