1 / 4
Magnetic Big Fidget Ball – Modular Desk Toy with Neodymium Magnets — image 1
1 / 4

Magnetic Big Fidget Ball – Modular Desk Toy with Neodymium Magnets

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Print, glue & snap! Magnetic modular desk toy – support required for best results 🧲

Rating
0 / 5
Likes
7
Downloads
19
Makes
0
Views
233
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

🧠 General

This is the larger version of my Fidget Ball, designed for smooth rotation and satisfying magnetic clicks.
It consists of two printed halves – simply print the provided file two times.

You will need:

20× neodymium magnets (5 mm ⌀ × 2 mm high)

2× neodymium magnets (10 mm ⌀ × 2 mm high)

No additional parts are needed – just magnets, glue, and a good print. 🧲

🧾 Printer Settings

All parts require supports for proper overhangs.
You can limit the support to the smallest groove, but enabling it everywhere gives cleaner results.

Material: PLA works perfectly (other materials also fine)

Layer height: 0.2 mm

Infill: 20 – 30 %

Supports: yes (required)

Brim: helpful but optional

🧷 Assembly

Insert the magnets using superglue.
Make sure all magnets are inserted with the same polarity on each half.
Then, on the second half, reverse the polarity so both sides attract when combined.

Once assembled, the halves snap together magnetically – great for fidgeting, stress relief, or as a cool modular desk display.

💡 Tips

✅ Print in bright colors for a playful look
✅ Make sure to clean supports carefully before gluing
✅ Works great as a pair with the smaller Fidget Ball

 

Anyone who would like to support me is very welcome to buy me a beer.

 JUST CLICK HERE

Tags