1 / 5
xTool M1 Ultra Inkpad Helper for Honeycomb
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use Inkjet module with honeycomb panel easier on xTool M1 Ultra
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 103
- Makes
- 1
- Views
- 503
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Ink pad with honeycomb needs to be perfect aligned. Insert it into the white gap and screw it (don't overtight) onto the back to hold it in place.
0.2 layer, 15% infill, supports on bed - best print orientation in photo
Steps using honeycomb with inkjet function and laser cutting together:
- Place image for Inkjet printing
- Select Inkjet printing mode
- Place this tool as you can see in the picture (marked as green)
- Process inkjet print job
- After job is completed swap inkjet module with laser module
- Switch to lasering on flat surface mode
- Set image output to off
- Set image outline or whatever you want to do with laser
- Do Auto-measure distance for laser
- Process laser job