1 / 1
Carvera Chuck Subplate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This places the center of the chuck in the anchor 2 (0, 0) position.
Print the subplate on an angle (30 degrees is ideal) to given it higher shearing strength, and be careful when installing the chuck to not over do tightening it.
The threads are M14x1.0 which are compatible with a number of chunks in addition to the K02-50 that comes with the Carvera rotary module.
If you need a more robust version made of metal, I sell a premade upright chuck here: https://serge.industries/products/carvera-cnc-upright-chuck-04515