1 / 3
Zahnrad gear Z 36 Bernardo P 600 G Wechselzahnrad — image 1
1 / 3

Zahnrad gear Z 36 Bernardo P 600 G Wechselzahnrad

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.41 – €0.51 net (excluding VAT)

For file: Zahnrad Z 36 txt versenkt.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.46 excluding VAT (range midpoint).

Weight reported by the author
7 g
Print time reported by the author
24 min
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Zahnrad gear Z 36 Bernardo P 600 G Wechselzahnrad

Rating
0 / 5
Likes
11
Downloads
60
Makes
0
Views
145
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Zahnrad mit 36 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G.
Das Zahnrad wird anstelle des originalen Zahnrades mit 32 beziehungsweise 64 Zähnen montiert.
Hebelstellungen und Gewindesteigungen sind aus der Tabelle ersichtlich.
Müßte auch an baugleiche Modelle wie HBM 280x600, Paulimot PM 3700 oder Warco GH 600 passen.
Gedruckt mit Prusa MK4
PLA
3 bis 4 Perimeter
50 % infill
Position der Naht: zufällig
Falls es jemand druckt und verwendet, bitte um Rückmeldung ob es auch an den anderen genannten Drehmaschinen paßt.
…………………
Gear with 36 teeth for driving the feed gear on the Bernardo P600G lathe.
The gear is mounted in place of the original gear with 32 or 64 teeth.
Lever positions and thread pitches can be seen in the table.
Should also fit on identical models such as HBM 280x600, Paulimot PM 3700 or Warco GH 600.
Printed with Prusa MK4
PLA
3 to 4 perimeters
50% infill
Seam position: random
If someone prints it and uses it, please let me know if it also fits on the other lathes mentioned.

Tags