1 / 2
Trimble bipod replacement bits
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Presser and stopper for Trimble bipod
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 36
- Makes
- 0
- Views
- 787
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
I had a half functioning Trimble bipod that required some additional bits.
A quick measure up and a bit of design in Fusion 360 and its now working great.
Prints were done in PETG and are working great.
The button measurement is 20.75mm diameter. The hole is ready for an m5 thread to be tapped. The hole goes nearly all the way through the button, so the screw helps in making the button strong.
The stopper measurement is 20.9mm diameter. The hole is ready for an m5 thread to be tapped.