Case for VoltCraft VC155 Multimeter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for VoltCraft VC155 Multimeter
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 64
- Makes
- 1
- Views
- 391
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Dies ist ein Case für ein Multimeter VC155 des Herstellers Voltcraft.
Es bietet Platz für das Multimeter selbst, den Temperaturfühler (unter dem Multimeter) sowie diverse Kabel, Ersatzbatterien, etc.
Als zus. Hardware werden benötigt:
2 x Schraube M3x50
2 x Schraube M3x20
4 x Mutter M3 (nach Möglichkeit selbstsichernd)
Printparameter:
Material: nach Wunsch (bei mir PLA+)
Nozzle: 0,4
Layer hight: 0,2
Perimeter: 3
Top-/Bottomlayer: 3
Infill: 20% Gyroid
Support: no
This is a case for a Voltcraft VC155 multimeter.
It accommodates the multimeter itself, the temperature probe (under the multimeter), and various cables, spare batteries, etc.
Additional hardware required:
2 x M3x50 screw
2 x M3x20 screw
4 x M3 nut (preferably self-locking)
Print parameters:
Material: as desired (PLA+ used here)
Nozzle: 0.4mm
Layer height: 0.2mm
Walls: 3
Top/Bottom layers: 3
Infill: 20% Gyroid
Supports: none