1 / 2
Spectrum Microdrive USB Drive Stick
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple casing for a Sandisk USB stick. Inspired by the Spectrum Microdrive
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 18
- Makes
- 0
- Views
- 249
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
I printed in Grey PLA, didn't need supports. If you used a USB drive with a metal shroud on it, you might not require the small hollow box section, I needed it to provide some pressure against the PCB so the drive would stay connected. I used a Sandisk with a flimsy housing which I removed. You might need to hold the stick PCB inside the casing with some double sided tape, I added a few bits, although you might not, if your USB is thicker.