Freeform cookie cutter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.44 – €0.53 net (excluding VAT)
For file: cookie_cutter_freeform_0.4n_0.1mm_PLA_MK4_38m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.48 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 37.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Design your own cookie cutter without CAD software
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
The idea was to show how a cookie cutter with arbitrary form, even from your own drawing can be designed, without using CAD software.
The shape is designed with a drawing software able to export drawings in svg format, I choose draw.io.
(1) Draw shape, line thickness 3pt, no small details. Add two markers top right and bottom left to fix size, should be completely outside a rectangle containing the shape. Export as svg-frame. Make sure background is transparent.
(2) Make line thickness 25pt, export as svg-base, transparent background again.
(3) Add the base as a form into PrusaSlicer, set height to 1.5mm, position at simple coordinates like x=100 y=100. Don't forget to mirror the svg if is is not symmetric.
(4) Add svg-frame as part (svg) to the base, mirror as before, set height to 10mm, set x and y coordinates as choosen in (3) - so the two parts are positioned correcty and joined.
(5) Remove the markers by putting a surface of a marker on the bed, then cut twice to remove the markers.
I used this to make a cutter with a copyright-protected shape, but as this may not be published the shape shown is a simple one.
If you want lines or motifs on the cookie, draw a second shape, export like the first one, combine both into a base so that everything is connected and add the second SVG with a smaller height, e.g. 8mm or 9mm, depending on how thick your dough is rolled out.