Estancia #568 Lunar Water Condensation and Filtration System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model of water condensation/filtration system that can be used on lunar surface. Design for BEST Robotics 3D Challenge
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 126
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Public Domain
Contact Name: Jaime Silva (Model created by a student)
School: Estancia High School
Best Hub: NMBEST
Description of the Process and Design Summary:
This challenge was interesting for me to do, and for me being a freshman I am still learning. I loved doing this project. First my friend and I started by doing some research about what was required and finding mock models. After we had our idea we started designing. We used Tinkercad because it was the only software we were familiar with. I started by designing something that would power the machine. I started with a wind turbine but realized that wind would not be efficient on the moon so I changed it to a solar panel. It took two days to design the wind turbine but then after changing it it took another day to design the solar panel. I made a wire with the drawing tool and snipped off each end to easily attach it to the pieces. I then designed the generator with a switch. I copied the wire that was used from the previous part to then connect the generator. Then I designed and connected the condenser. The condenser was a problem because there was a gap between the fan and the top of the condenser. After printing this part, the breakaway material was very hard to get out of that gap. The next part of the design was a vacuum. I started with a box and separately made a cylinder with ridges. This was made with multiple cylinders of two sizes. I had a pipeline connect to the condenser and then the vacuum. After everything in that part of the cycle I made a crusher (for ice crystals) that ended up looking like a fire hydrant but it got the job done. I smoothed it out so it would print faster. As I continued I used the original pipe just in copies and different orientations. I put this pipe between the condenser and crusher. Then I added one more pipe connecting the condensing pump and the crusher. For the final part, I made a heating system with a pipe coming out and going into a water purifier with a faucet. For the heating system I took a rectangular box and put 3 half circles and also designed a little vent. I used the same pipe design again and twisted it in a different way. I used a longer pipe to connect the water purifier.
Printing the final design took about 1.5 - 2 weeks, because I only had time during class to remove builds from the plate and start another. I also printed it in individual parts instead of all together. During this time I learned all about the 3D printers we had at the school. How to load and unload filament, layer heights, infill, and more. Once everything was printed I used an extra piece of plywood and painted a moon on it to attach everything to. The next day after the moon dried I glued down the model to the board. And so my model is complete. I had so much fun making it and I hope I get to do this again. Thank you for your time.
What printer did you use? MakerBot Sketch
Infill 15%
Brim NO (Did use a raft)
SUPPORTS YES (Breakaway)
Type of Filament: PLA