CO2 Rocket (with puncture)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A little rocket i designed thta uses 12g Co2 catridges to power a small rocket.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 31
- Makes
- 0
- Views
- 226
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a little model I designed that takes a 12g Co2 cartridge and powers a small rocket.
I would recommend printing the rocket on 15% infill but I suggest adjusting that based on how it flies. I would suggest printing at a very high density for the nail holder as it needs to be strong.
Assembly: Glue, or tape the separate pieces of the rocket together and keep them aligned. after inserting a 12g Co2 cartridge into the rocket's base until it sits flush with the bottom. next, apply a bit of tape to the nozzle of the cartridge and then push the nail holder on. After, insert a small nail into the end. DON'T PUSH TOO FAR OR IT WILL GO OFF!
Once assembled drop the rocket from a decent height and make sure it lands on the nail and it should shoot off.
the model is split into 4 pieces so you can replace individual sections in case of breakage.