1 / 5
Clamping System
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Clamping system. For fixing during work. good for metrological use, so as not to have any impact or scratch on the part.
Use standard M8 nut for insertion into hand nut.
For use Hand nut cut an M8 threaded bar as long as you want (used on plate with M8 insert).
For Print : T30 / T60 / T90 / FS60 / FS90/ FS120 /FD60 / FD90 / FD120
Layers Height: 0.2mm
Fill Density: 30%
Shell: 3mm
For Print : Hand Nut → See picture.
Thank you