1 / 2
I Heart Soil Sticker HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You can find I heart Sticker here https://www.soils.org/stickers/
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Model is 200x200mm. If you want it smaller just change the X and Y. Leave the Z alone
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
- PLA+ Elegoo Black
- PLA+ Elegoo Red
- PLA+ Elegoo Black
- PLA+ Elegooe White
Swap Instructions:
Black until layer #8 at 0.72mms
Red until layer #14 at 1.2mms
Black until layer #20 at 1.68mms
White until layer #27 at 2.24mms