1 / 3
Pin Tumbler Lock
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fully functional pin tumbler lock, key and lockpick. Modeled in Autodesk Fusion 360.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- GNU General Public License v3.0
Printed parts:
Part_1 1x
Part_2 1x
Part_3 2x
Part_4 1x
Part_5 1x
Pin_1 1x
Pin_2 1x
Other parts:
Spring from spring pen 2x
How to assemble?
1, Print all parts.
2, Check that the individual parts fit together. If not, use sandpaper.
3,Assemble all the parts as shown in the picture.
Start by inserting part_1 into part_2.
Then insert Pin-1 and Pin-2 into the holes at the bottom of part_1 and then part_3 and the springs.
Hold them in place with your finger and secure with part_4.
In the next step, put part_5 on part_2.