1 / 3
Facehugger
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
During assembly, I found that applying too much force could break the joints inside the model.
Therefore, I modified the assembly method for the joints.
Now, I insert one half of the joint first, adjust the angle, and then insert the other half.
This way, I no longer have to worry about the joints breaking inside the model.
在組裝過程中，我發現用力過大可能會導致關節在模型內斷裂。
因此，我修改了關節的組裝方式。
現在，我先插入一半的關節，調整好角度後再插入另一半。
這樣一來，我就不再需要擔心關節在模型內斷裂的問題了。