1 / 3
20mm Riser for JetBlack Turn Block
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 20mm riser block for a JetBlack Turn Block. To fit the Prusa Mk3 build Plate it doesn't completely cover the base of the turn block but should be sufficient for stability.
I sliced it to minimise filament but to give enough strength, key slicer parameters for me were:
- Nozzle 0.6mm using PETG
- Layer height 0.25 mm
- Infill 3D Honeycomb at 7%
- Perimeters = 2, 3 top and bottom layers
Above used 188gm/63m of 1.75 filament taking 6hr23min to print.
You can if needed adjust the height in slicer if you have a different trainer.