1 / 3
VzBot Printhead x-endstop-mount for DFW-05 micro switch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace D2F-01L micro switch with a DFW-05 one
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 72
- Makes
- 0
- Views
- 456
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I didn't want to solder the provided micro switches with the mellow kit, so I ordered DFW-05 micro switches from AliExpress.
DFW-05 Type H: https://de.aliexpress.com/item/1005007440874580.html
Attention: You may need to adjust the printer.cfg configuration for position_max. Otherwise, the belt clip might collide with the idler.
Here is an example:
[stepper_x]
## in M6 position
step_pin: PE0
dir_pin: PG3
enable_pin: !PG4
rotation_distance: 40
microsteps: 16
full_steps_per_rotation: 200
endstop_pin: PF10 #make sure to set the correct pin here.
position_endstop: 0
position_min: 0
position_max: 230. #original value 235.
homing_speed: 50
homing_retract_dist: 0