Tour Eiffel MINI-ature
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.32 – €6.50 net (excluding VAT)
For file: Tour_Eiffel_Print_Pyramid_v1_250pc_0.15mm_60pc_PLA_208C_Retra3pt5_70_8h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.91 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 8.21 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Tour Eiffel Miniature in 2 parts to fit the Prusa MINI bed! A full model is provided for any other larger bed printer
- Rating
- 4 / 5
- Likes
- 25
- Downloads
- 467
- Makes
- 1
- Views
- 1,456
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Architecture & Urbanism
- License
- Creative Commons — Attribution — Share Alike
This Tour Eiffel MINI-ature (Miniature for the Prusa MINI) :-) …. took me long time and several stops and restarts from frustration. I modeled this miniature starting from a metallic miniature and using pictures of this iconic tower.
Cette MINI-ature de la Tour Eiffel (Miniarure pour la Prusa MINI) :-) … m'a pris très long temps et beaucoup d’arrêts et de redémarrages pour la frustration. Je l'ai modelée à partir d'une miniature en métal (Souvenir de Paris) et avec des images de cette tour incontournable.
I wanted to become more and more proficient in modeling complex structures in FreeCAD and Blender and wanted to bring my Prusa MINI+ to the limit of its capability….But it did good! :-)
Je voulais arriver à maîtriser la création de structures compliquées dans FreeCAD et Blender et je voulais aussi presser ma Prusa MINI+ à son max de potentiel ….Mais elle a bien tenu le coup! :-)
Design software:
FreeCAD for all structural portions (beams / trusses).
Blender for the assembly, the mesh consolidation and cleanup and the optimization of the model.
Can be very challenging for 3D printing for stringing, bridging and bed adhesion.
Dimensions: 137 x 137 x 304 mm (assembled). Split in two portions to be printed on my Prusa MINI+.
Printing Details:
Printer: Prusa MINI+
Material: Prusament PLA “My silverness”, printed at 208°C (found to be the best compromise for my printer and settings)
Infill: 60%
Nozzle: 0.4mm
Layer Height: 0.15mm
Supports: Yes, detachable snug support in the core of the tower.