1 / 2
Yaesu Handset / Microphone Hanger for Woodscrews
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Another woodscrew hook for another ham radio mic.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 55
- Makes
- 0
- Views
- 237
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I have a couple Yaesu radios, which use an MH-31 and MH-48 mic. The original hanger is cheap and thin sheet metal, which easily bends, so I created this holder.
I believe I made this for #8 wood screws, due to naming the model the way I did.
- Remember to drill a hole first so you don't split the wood!
- Do NOT over-tighten, or you may split the sides of the mount.
Print this laying on its' face, as that will ensure the best strength as well as surface finish. This can be mounted vertically or horizontally; just not upside down or backwards.