A simpler version of DIY perks' artificial sun
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.37 – €0.46 net (excluding VAT)
For file: Filter ring.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.41 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 21 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Watch the video explanation here: https://youtu.be/unsPGNX6MYQ
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Share Alike
Filter ring
This is the mold for the caulk that makes the sunlight filter
Filter ring pressing tool
You can clamp this on top of the filter after adding the caulk to get an even top surface
Control box
2 piece print. This holds the electronics. hardware.scad is a dependency. I have not uploaded any meshes because that would be useless unless you have exactly the same hardware as me. Use the openscad customizer and make your own 3d model and print files.
Backplate
Mount the LED to an AM4 stock cooler and a speedlite flash to bowens mount adapter