(Enhanced) Filament dry box - heated, ventilated, Arduino or ESP8266 controlled
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heated, ventilated, arduino or ESP8266 controlled filament dry box with Ikea 365+ 10,6 l box
- Rating
- 0 / 5
- Likes
- 66
- Downloads
- 178
- Makes
- 0
- Views
- 3,019
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I ported the original arduino software by werner_rh for an Wemos D1 Mini because I wanted to monitor the drying sensor data with grafana. Therefor the sensor data is transmitted via mqtt an transered to influxdb using telegram. The improved code an configuration examples can be found in a branch at Werners github: https://github.com/werner-rh/drybox-control/tree/ESP8266-grafana
My git repository includes the kicad files as well. You have to solder the Wemos D1 Mini with the ESP8266 module facing down sides.
The improved print files have 3 new components:
- Additional holes for 3 status LEDs in the control box
- One combined module for the back plate, the heater base and the mos fed holder (may need some support to print)
- A shortened spool holder from Armin3dps project to fit on 230mm print beds an without the silica box
From the two original projects you need all parts except the ones mentioned above.
https://www.printables.com/model/724722-filament-dry-box-heated-ventilated-arduino-control
https://www.printables.com/model/185335-filament-trockenbox-filament-dry-box
[Edit 14.12.2024: Changed Link to Werners github]