Easy print Wyvern Ignition (Great Sward from Monster Hunter World)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MHW great sword Wyvern Ignition. Added supports and cut so can be printed easier with no additional supports.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 85
- Makes
- 0
- Views
- 963
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Share Alike
I love the look of wyvern ignition, but models from games are always hard to print. I recently learned onshape so i thought to modify the model and see if it'll be easier to print. Worked out great!
Changes:
Cut model into 3 parts with a peg to connect them. They'll still need to be glued together as the peg only serve as a guide.
Support under some pipes so they no longer floats. The rest of the pipes should be bridgeable.
Thicken parts that can't be printed by 0.4mm nozzle.
Add design support under floating part near the top. Should be easy to remove.
Feel free to scale the model. The peg as it is has no clearance anyway. Just scale the peg down a bit afterward to make it fit. I suggest shrinking it sideways but not length wise. '