JKA Karate Keychain
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.93 – €7.25 net (excluding VAT)
For file: JKA Karate keychain slicer_0.25n_0.15mm_PETG,PETG,PETG,PETG_MK4ISMMU3_7h28m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.59 excluding VAT (range midpoint).
- Weight reported by the author
- 69 g
- Print time reported by the author
- 7.46 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Multimaterial keychain
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
JKA karate logo keychain. Prints in the pictures are made of Prusament PETG (Signal white, Matte Black, Lipstick Red and Urban Grey), printed on MK4 + MMU3 + satin sheet.
- Print with 0.25mm nozzle.
- Make sure you use perfectly dry filament.
- I attach complete Prusa Slicer file, as I found it a bit tricky to print on default profile settings.
- Configuration is also available separately in the config.ini file attached.
- The other 3mf file contains plain objects only. You will need to colour them in the slicer.
- G-code attached will print 28 keychains - use following color sequence for loading filaments (Prusament PETG) into MMU unit: 1-Black, 2-Grey, 3-White, 4-Red.