Gyro Zeppeli Intro Panel from JJBA:SBR
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.69 – €4.51 net (excluding VAT)
For file: Gyro_Zeppeli_Intro_Panel--0.4HF.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.10 excluding VAT (range midpoint).
- Weight reported by the author
- 27 g
- Print time reported by the author
- 5.27 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The first manga panel that shows Gyro fully.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 50
- Makes
- 0
- Views
- 482
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A Hueforge manga panel of Gyro Zeppeli from JJBA: Steel Ball Run. If you try to print this, I would like to know how it looks like with darker blue (originally used as shading, but I don't have a blue filament that dark). I'd be glad to see all makes, even if they fail.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Water Blue
At layer #12 (1.04mm) swap to Gray
At layer #21 (1.76mm) swap to White for the rest.