Play BOX NET Router HFC NE6037 120mm fan adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter designed for mounting a 120mm PC fan on top of standard FTTH Play/P4/UPC router.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 28
- Makes
- 0
- Views
- 188
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- BSD License
PL:Model przeznaczony do montażu na routerze, pasujący na lekki wcisk. Ułatwia chłodzenie standardowego routera od Play (model NE6037). Router sam w sobie potrafi się przegrzać i wyłączyć, a Play pozostaje obojętny na prośby o wymianę. W związku z tym zaprojektowałem taki model. Podstawa jest nieco za cienka, ale po przykręceniu wentylatora trzyma się solidnie.
Przykręciłem standardowy wentylator PC 120 mm 12 V, używając śrubek od obudowy komputera. Wentylator zasilam z portu USB routera (5 V). Obraca się powoli i cicho, a temperatura na górze obudowy spadła z 60°C do 37°C.
EN:A model designed for mounting a 120mm PC fan on top of a Play (formerly P4/UPC, Polish ISP) router to prevent overheating. The router model is Play BOX NET Router HFC NE6037. The router tends to overheat and shut down, so I designed this adapter. It fits snugly with a gentle press. While the base is slightly too thin, it holds firmly once the fan is screwed in.
I used a standard 120mm 12V PC fan secured with case fan screws. The fan is powered by 5V from the router's USB port. It spins slowly and quietly, reducing the case's top surface temperature from 60°C to 37°C.
Printing:
- Printer: Alfawise U30
- Infill: 15%
- Print speed: 40mm/s
- Supports: no
- Filament: PLA